Description

TRAK VMC7si VERTICAL MACHING CENTER

 Delivered on November of 2023    Hours of use – Estimated at 4 Hours

 

STANDARD FEATURES:

SINUMERIK ONE CNC by Siemens

24-Station Tool Magazine, Dual Arm Tool Changer

Advanced 12,000 RPM Spindle with Hybrid Ceramic Bearings

Linear Roller Bearing Slides on All Axes

Coolant Through Spindle (CTS)

and many more…

 

MACHINE SPECIFICATIONS:

Table size                                                                                35.43″ x 19.69″

Travel (X, Y, Z axis)                                                               30″ x 20″ x 20″

Travel (X, Y, Z axis) with soft limits                                       30.16″ x 20.24″ x 20.24″

Rapid traverse X, Y, Z                                                            1,000 IPM

Cutting max. speed X, Y, Z                                                    1,000 IPM

T-slots (number x width x pitch)                                             5 x .709″ x 3.937″

Maximum weight of workpiece                                              1,518 lbs

Footprint                                                                                  144” x 112”

Height of table from bottom of floor***                                38″

Min. spindle nose to table distance ****                                3.5″

Max. spindle nose to table distance ****                               23.50″

Distance of ATC arm to table                                                  20″

Min. machine height ***                                                        93.5″v

Max. machine height (head all the way up) ***                    108″    v

Overall width with side doors open and chip conveyor         177″

Overall length of machine with electrical door open 180°     150.25″

Footprint of machine with chip conveyor & coolant tank in place.

Pendant not rotated 90° (width x length)                                144″ x 112″

Weight net / shipping                                                              8,360 lbs

 

SPINDLE SPECIFICATIONS:

Spindle taper                                                                           40 Taper

Spindle speed range    (12,000 RPM Max)                             10 – 12,000 RPM

Spindle nose diameter                                                             3″

Tool clamping force (90 psi)                                                   1,500 lbs

Tool holder type                                                                      CAT 40 standard

ATC tool capacity                                                                   24

Maximum tool weight (incl. holder)                                       17.6 lbs

Maximum tool diameter                                                          3.07″

ATC arm tool change time                                                      2.5 seconds

Spindle motor HP – peak                                                         41.5 HP

Spindle motor HP – continuous (480V)                                  20.1 HP

Spindle center to spindle head casting face                            18.25″

Spindle cooler oil capacity                                                      1 gallon

Power Requirements 

Power requirements – standard Machine                                480V

Comes with the optional and is Included on this machine

One transformer that will run on 208,230 and 240 3 Phase

COOLANT SYSTEM:

Tank capacity                                                                          60 gallons

Pressure and volume                                                               8.7 gpm @ 42 psi

Pump and wash power                                                            750 watts

Coolant wash pump                                                                750 watts

CTS pump (Coolant Through Spindle)                                   3 KW / 4 HP

CTS pressure                                                                           319 psi

Air Requirements

Air – CFM, SCFM (at 90 PSI)                                                2.5 CFM, 18 SCFM

Air quality  Air dried/water separator upstream of VMC

LUBRICATION REQUIREMENTS:                               

Lubrication pump capacity                                                     2 liters

Lube Oil Type                                                                         ISO 32 or 10 W

Specifications subject to change.

** Must remove ATC motors and all sheet metal attached to top of electrical cabinet. The cable way for Z axis also needs to be removed. The lifting point on the electrical cabinet is now the highest point.

*** Height changes slightly based on how machine is leveled on leveling screws.

**** Can vary slightly due to soft limit settings.

EQUIPPED WITH:      * Optional at time of purchase

SIEMENS Sinumerik One CNC Control

High Performance Servo Motors

12,000 RPM Spindle

Thru the spindle coolant (CTS)

24 Station Tool Change

*Transformer – for 208, 230, 240 Volt Incoming voltage to 480 machine (2,950)

*HW – Hand Wheel Pulse generator Option. (MO8)  (249.00)

*Oil Skimmer (902.00)

*Retention Knob Kit (557.00)

*Renishaw Probe Tool And Part Measurement Kit (11,139.00)

*One Dynamic – Surfacing -S42 (4,965.00)

 

Customer Paid. 11.2023 over $119,000.00 with freight and creating in total with all options.

 

PRICE..at location in CT …..Rigger additional for loading……..$55000.00 ** (Freight quotes available)

 **We will provide the correct prep to get machine ready for shipping, and will install the proper shipping brackets and mark all lines and connection for an easy set up on your end.

Machine is under power for your inspection on our Stratford CT Warehouse.